Stainless Steel Fig200/206 Integral Hammer Union Butt Weld Hammer Union

• Standard: DIN, ANSI
• Material: Iron Alloy
• Connection: Female
• Surface Treatment: Galvanized Sheet
• Head Type: Round
• Transport Package: Plywood Case
• Model NO.: FIG200
• Specification: 2"-6"
• Trademark: ZX
• Origin: China, Shandong, Dongying
• Production Capacity: 50000pieces /Year

Product Description

Stainless Steel FIG200/206 integral hammer union butt weld hammer union 

Product Description

The Hammer Union can be used for cementing trucks, all kinds of manifolds and other high pressure equipment, and pipes. It is an important part for transporting oil. Water, fracturing fluid and mixed fluid. These products are all made of high quality steel by forging and finishing cut. They have good. Mechanical performance and sealing property. Especially they can operate under the bad weather condition. They can be assembled fixed easily and conveniently. Main technical parameter model number collecting norm working pressure, structural length drift diameter. The product adopts some end connections of pipeline thread, tubing thread, butt-weld. 

The Hammer Union type mainly consists of Figure 100, Figure 200, Figure 206, Figure 300, Figure 400, Figure 600, Figure 602, Figure 1002, Figure 1003, Figure 1502 and Figure 2002, figure 2202

 
 

Installation

 

Wherever they are,wing nuts and right ACME will ensure quick installation or dismantling without special tools.

 

Highly Interchangeable

 

All unions are made in American system,and can be interchanged with products in international market.

 

Seal rings are fully interchangeable with equivalent products;

 

Marks of size and pressure in wing nuts are formed in die-forging model,same as international products.

 

Honorary Certificate

 

Our products have been ISO9001 certified and attained API 6A,6D,API 7,7K,and API 16A&16C approvals of American Petroleum Institute.All products are fully designed and manufactured in accordance with API,ANSI,GB(national standards)and SY(industry standards)standards.

 

Fig 50. These low pressure and suction hammer union of Fig50 are made from carbon steel. Available in 4" or 5" sizes in threaded & socket welded connection. These unions are suitable for 500 PSI wp.
Fig 100. These low pressure hammer unions are ideal for manifold and applications where CWP does not exceed 1000 PSI.
Fig 200. These hammer unions are best suited for medium pressure ranges involving air, water, oil & gas service for cold working pressure up to 2,000 PSI. Up to 4" no O-ring is used on the male sub. Beyond 4" size, an O-Ring is used on the male sub for sealing. The Figure 200 is a compact and economical hammer union, available with Threaded and ButtWeld ends.
Fig 206. These hammer unions have an additional 'O' ring on the spherical surface of the male sub providing a leak proof seal. All dimensions of Fig200 & Fig206 are identical.
Fig 207. Fig207 Blanking Caps and hammer unions are fully interchangeable with Fig200 and 206 hammer unions. For use where the blanking off at the end of a line is desirable. The cap is fitted with an 'O' ring to ensure a leakproof seal.
Fig 400. These hammer unions are rigid in design and have all the three parts made of steel forgings. These hammer unions are best suited for manifold and line connections. Hammer unions from 3 inch through 8 inch sizes have O- rings for primary sealing. From 5" to 8" sizes C.W.P. is 2,500 PSI.
Fig. 600. These hammer unions have wide range of applications including steam service and line connections. These unions are provided with a bronze seat in the female for the effective sealing and prevention of rust formation. Suitable for 6000 PSI CWP.
Fig 602. These unions are recommended for manifold and line connections truck mounting and in mud services. These hammer unions have resilient lip-type seal for positive sealing and also protects secondary metal - to metal seal. Suitable for 6000 PSI.