| Customization: | Available |
|---|---|
| After-sales Service: | 1 Year |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
The Composite Bridge Plug is made from composite material and the material does not contain aluminum or steel that is hard to drill out. There are three types for composite bridge plugs, plug type, check valve type and ball drop one.
It's a oilfield plugging tool that supported by bidirection slips, setting via hydraulic pressure or wireline, release by drilling or grinding. It's widely used in fracturing, plugging, testing, inspect leakage, cement injection and other constructions. It can bearing two-way pressure, plugging lower high pressure temporary or permanent. Easy operation, safe and reliable, good bearing high pressure ability, drill ability.
|
Suitable casing size |
13.5-9.5lb/f(99.56mm-103.88mm) |
17-23lb/ft (118.62mm-124.26mm) |
|
Max OD |
3.62"(92mm) |
4.4"(112mm) |
|
Min ID |
1.1"(28mm) |
1.5"(38mm) |
1. Drillable cast iron construction
2.Uses Alpha Big Boy Setting Sleeves and Adapter Rods
3.Wireline set on GO or Baker Wireline Pressure Setting ToOl
4.Hydraulic set on ACT Hydraulic Setting Tool
5.Small OD's for extra clearance in heavy viscous f|UidS
6.One-piece slips set in premium grade casings including
7. P-110 Plug remains set untilgas pressure equalizes during drill out.
Product Picture:
Factory:
){kind=link}