AISI 4140 Sucker Rod Coupling

• Customization: Available
• After-sales Service: After Sales Service
• Warranty: 10 Months
• Model NO.: 1-1/8" SUCKER ROD COUPLING
• Manufacturing Process: CNC Milling
• Surface Treatment: Phosphating
• Operation Pressure: 10 MPa
• Material: Alloy
• Rod Coupling: AISI 5140/4140
• Length: 4-5"
• Size: 5/8"~1-1/8"
• Type: Fs or Sh
• Transport Package: Wooden Case
• Specification: 5/8", 3/4", 7/8" 1" 1-1/8"
• Trademark: ZX
• Origin: China
• HS Code: 8431431000
• Production Capacity: 6000 PCS Per Month
• Package Size: 40.00cm * 50.00cm * 60.00cm
• Package Gross Weight: 0.560kg

Product Description

SM  SUCKER ROD COUPLING 

Sucker Rod Coupling is a joint for Sucker rod, used in oil well downhole for oil pumping and Production. Sucker rod couplings are manufactured from high quality Alloy Steel AISI 5140, fully in accordance with API Spec 11B standard, including class SM coupling, class T coupling, Sub coupling, Full Size, Slim Hole and Over Size, and the thread size are available at 5/8", 3/4", 7/8", 1" and 1 1/8".

Class T and Class SM coupling for sucker rods are manufactured as per API Specification 11B. For the thread cutting, the Company is using cold form rolled by displacing rather than by removing of material for making the coupling thread. The thread rolling cutting results in a compressive stress at the root of the thread, giving maximum strength to the traditional weak point of cut-thread couplings.


 
MAIN SPECIFICATION 

Type	SUCKER ROD COUPLING
T, SM	Nominal Size   (in)	Outer Diameter  +0.13(+0.005)- 0.25(-0.010)(in/mm)	Inner Diameter  +0.13(+0.005)- 0.25(-0.010)(in/mm)	Outer Size(in) O.D.*Length	Weight  (kg)
Full Size	5/8"	1 1/2(38.10)	15/16(23.81)	1.500×4.000	0.56
	3/4"	1 5/8(41.28)	1 1/16(26.99)	1.625×4.000	0.62
	7/8"	1 13/16(46.04)	1 3/16(30.16)	1.812×4.000	0.75
	1"	2 3/16(55.56)	1 3/8(34.93)	2.187×4.000	1.15
	1-1/8"	2 3/8(60.33)	1 9/16(39.69)	2.375×4.500	1.45
Slim Hole	5/8"	1-1/4(31.8)	15/16(23.81)	1.250×4.000	0.41
	3/4"	1-1/2(38.1)	1 1/16(26.99)	1.500×4.000	0.47
	7/8"	1-5/8(41.3)	1 3/16(30.16)	1.625×4.000	0.52
	1"	2(50.8)	1 3/8(34.93)	2.000×4.000	0.58

TECHNICAL PROCESS 

Preparing material→Drill hole→Heat treatment→Rough turning( Lathe outer circle→Flat end face→Lather Chamfer→Mill wrench flat)→Surface treatment/ball blast→Spray weld→Mill out circle→Flat end face→Fine turning(Lathe inner hole→Flat end face→Lathe sunk hole→lather inner chamfer) → Thread tapping→Phosphating→Grind outer bevel→Grind wrench flat→Grind outer circle→Washing→Rust-proof treatment→Punching mark→Packaging→Leave the factory




CONTACT :   VICTORIA