The Gas Anchor has been designed as a continuous flow downhole gas separator to be used in conjunction with progressing cavity pumps. The uses centrifugal forces to separate the gas from the produced liquids, before they enter the pump. Liquids will be carried through into the pump suction while the separated gases are forced to migrate up the annulus.
1). The Gas Anchor must be installed in the string below the pump.
2). When the pump is landed in the well, the P.C. Anhcor should be above the perforations.
3). If it is desired or necessary for the fluid intake to be below the perforations, tubing may be ran below the gas anchor (tail joints).
Available Sizes
1.2-7'8"with 2-3/8" Pins ≤130bbl/day
2.3-1/2"with 2-7/8" Pins ≤200bbl/day
3.In two, easy to transport and assemble 10' sections
AnchorType |
LZX-113 |
LZX-140 |
Max OD mm |
113 |
140 |
Max OD of cup mm |
132 |
165 |
Connection thread type |
2 7 /8TBG |
2 7 /8TBG |
Max length mm |
3200 |
3200 |
Suitable casing size in |
5 1 /2'' |
7'' |
Packaging & Shipping
Company Profile